PRODUCTS
Your location:Products >> Electric valve >> Pneumatic fixed ball valve
Pneumatic fixed ball valve
Model: Q647F
Nominal diameter: DN50 ~ 500mm
Nominal: PN1.6 ~ 6.4MPa
Temperature: -28 ℃ ~ 300 ℃
Suitable medium: water, steam, oil, nitric acid, acetic
Operation: manual, pneumatic
Structure length by: GB1221-89
Flange size by: GB9113, JB79-59
Test by: JB / T9092-99
Product details

Pneumatic fixed ball valve overview

Pneumatic fixed ball valves, pneumatic ball valves, ball valves are two-way valve, the flow of unlimited. The flange is connected with studs, the upper and lower stems are equipped with sliding bearings to reduce friction, the use of labor-saving, smooth. Under normal conditions: when the pressure is low, the valve seat seal relies on the spring pre-tightening force to make the valve seat close to the ball body to seal. When the pressure is high, a piston effect is formed on the valve seat. Under the action of the upstream medium pressure, To seal, fixed pneumatic valve, pneumatic valve, ball valve is widely used in process control system to achieve on or off.

Pneumatic fixed ball valve technical parameters

Valves transfer method Link form structure type Sealing surface Nominal pressure (MPa) Body material
Ball valve 6-pneumatic 
       6s-pneumatic band manual 		4-flange
 Fixed ball straight F-Fluoroplastic 
       H-alloy steel 
       PPL 		1.6 
       2.5 
       4.0 
       6.4 		According to the table body 
       material code
Nominal diameter DN (mm) 50-500
Material code C P R
The main parts Body WCB ZG1Cr18Ni9Ti ZG1Cr18Ni12Mo2Ti
Ball board 2Cr13 1Cr18Ni9Ti 1Cr18Ni12MoTi
Valve stem 2Cr13 1Cr18Ni9Ti 1Cr18Ni12MoTi
Sealing ring Enhanced polytetrafluoroethylene alignment poly stupid
filler Polytetrafluoroethylene flexible graphite
Fitness 
       with 
       working
       conditions 		Suitable media Water, steam, oil Nitric acids Acetic acid
proper temperature -28 ° C to 300 ° C
Control type Double-acting / single-acting
The role of type Cut / adjust
input signal Electrical signal: 0 ~ 10mA, -4 ~ 10mA gas signal 20 ~ 100kPa
Reply voltage AC220V / DC24V
Working medium Purification compressed gas
Actuator model GT series, HY series, AW series, ZSH series
Air pressure 0.4 ~ 0.7MPa




Pneumatic fixed ball valve installation dimensions


The next：Pigging valve
The previous：Electric eccentric hemispherical valve